STEP 1
Take your Fire TV Stick Device. You’ll find a micro-USB port and an HDMI there. Now plug the USB power cord into the micro-USB port of your Fire Stick and plug the other end of the power cord to the Power Adapter.
STEP 1
STEP 2
Now connect the Power Adapter to a power outlet. (Note: It is recommended to use the Power Adapter and not the powered USB Ports offered by few TVs).
STEP 2
STEP 3
Now plug the Fire Stick into any HDMI port on your TV. Please remember the HDMI Port number as you’ll now be required to turn ON the corresponding HDMI input Channel on your TV. Turn ON your TV and open the corresponding HDMI input Channel. You’ll see a loading screen with the Fire TV Stick logo. It might take some time to load for the first time, so don’t worry.
STEP 3
STEP 4
Now it’s time to set up your Fire Stick remote. First, insert the two AAA batteries included in the box. Now the remote should automatically pair up with the Fire Stick. However, if it doesn’t pair automatically, just press and hold the Home button on your remote for 10 seconds.
STEP 4
STEP 5
Once the remote is paired with FireStick, press the Play/Pause button to start the set-up process
STEP 5
STEP 6
FireStick will now ask you to choose your preferred language. Highlight the desired language using the navigation keys on the remote and press the Select/OK button on the remote to set the language. Note: Select/OK is the circular button on the remote enclosed inside the navigation buttons
STEP 6
Part 2: Connect Amazon Fire Stick to Wifi
Your FireStick will now scan for the available Wi-Fi networks within the range.
STEP 7
STEP 8
When you see the list of the networks, choose your Wi-Fi and enter your SSID and password (if required) to connect
Part 3: Register FireStick with an Amazon Account
Now it’s time to register your device to your Amazon account. Your Amazon Fire TV Stick will be pre-registered if you have ordered it from NextGen IPTV.
STEP 10
However, if that’s not the case or if you wish to register through a different Amazon account, you can just follow the on-screen instructions to Register or De-register Your Fire TV.
STEP 11
Your FireStick will now register. Wait for a few seconds.
STEP 12
When the registration is finished, FireStick will ask if you wish to save your Wi-Fi password to your Amazon account. If you use multiple Amazon devices registered to the same Amazon account as FireStick, it would be a good idea to choose Yes to allow those devices to quickly connect to your Wi-Fi network. If you don’t have any other Amazon devices and don’t even intend to buy one in the future, you might just as well select No
Part 4: Pair FireStick remote with TV
The following steps are only for Remotes with TV controls. If you don’t have a remote with volume buttons, you can skip this part and move to the next section.
STEP 13
When you see this window, click Next
STEP 14
Press the Volume Up and Volume Down buttons on your remote Make sure the remote points at the TV. The TV control buttons use the IR profile for your TV. Therefore, your TV and remote need to be in the line of sight for TV control functions to work.
STEP 15
Click Yes if you heard the sound. If not, click NO to repeat the process
STEP 16
When the Fire TV remote has successfully synced, you will see the following message on the screen
STEP 17
You have successfully set up your FireStick
Previous slide
Next slide